cutting tool
PDI
Polycrystalline Diamond Insert
Polycrystalline Diamond Inser-t
background
- Material:PCD Blade
- Characteristics：long life, high hardness, fine surface
- Application:Apply for many industries like mold, motor, aerospace, national defense, electronic, wood, precision working, etc.
- Custom made according to your request.
»80° Insert
 |
||||||||
| unit:mm | ||||||||
| Order Code | D1 | S1 | Re | D2 | Z | α1 | α2 | α3 |
| CNMM120402F-NAP1 | 12.7 | 4.76 | 0.2 | 5.16 | 1 | 80° | 0° | 10° |
| CNMM120404F-NAP1 | 12.7 | 4.76 | 0.4 | 5.16 | 1 | 80° | 0° | 10° |
| CNMM120408F-NAP1 | 12.7 | 4.76 | 0.8 | 5.16 | 1 | 80° | 0° | 10° |
| CNMM120412F-NAP1 | 12.7 | 4.76 | 1.2 | 5.16 | 1 | 80° | 0° | 10° |
| CCGW060201F-PAP1 | 6.35 | 2.38 | 0.1 | 2.8 | 1 | 80° | 7° | 0° |
| CCGW060202F-PAP1 | 6.35 | 2.38 | 0.2 | 2.8 | 1 | 80° | 7° | 0° |
| CCGW060204F-PAP1 | 6.35 | 2.38 | 0.4 | 2.8 | 1 | 80° | 7° | 0° |
| CCMT060201F-PAP1 | 6.35 | 2.38 | 0.1 | 2.8 | 1 | 80° | 7° | 10° |
| CCMT060202F-PAP1 | 6.35 | 2.38 | 0.2 | 2.8 | 1 | 80° | 7° | 10° |
| CCMT060204F-PAP1 | 6.35 | 2.38 | 0.4 | 2.8 | 1 | 80° | 7° | 10° |
| CCMT09T301F-PAP1 | 9.525 | 3.97 | 0.1 | 4.4 | 1 | 80° | 7° | 10° |
| CCMT09T302F-PAP1 | 9.525 | 3.97 | 0.2 | 4.4 | 1 | 80° | 7° | 10° |
| CCMT09T304F-PAP1 | 9.525 | 3.97 | 0.2 | 4.4 | 1 | 80° | 7° | 10° |
| CCMT09T308F-PAP1 | 9.525 | 3.97 | 0.2 | 4.4 | 1 | 80° | 7° | 10° |
| CPMH080201F-PAP1 | 7.94 | 2.38 | 0.1 | 3.5 | 1 | 80° | 7° | 10° |
| CPMH080202F-PAP1 | 7.94 | 2.38 | 0.2 | 3.5 | 1 | 80° | 7° | 10° |
| CPMH080204F-PAP1 | 7.94 | 2.38 | 0.4 | 3.5 | 1 | 80° | 7° | 10° |
| CPMH080208F-PAP1 | 7.94 | 2.38 | 0.8 | 3.5 | 1 | 80° | 7° | 10° |
| CPMH090301F-PAP1 | 9.525 | 3.18 | 0.1 | 4.5 | 1 | 80° | 7° | 10° |
| CPMH090302F-PAP1 | 9.525 | 3.18 | 0.2 | 4.5 | 1 | 80° | 7° | 10° |
| CPMH090304F-PAP1 | 9.525 | 3.18 | 0.4 | 4.5 | 1 | 80° | 7° | 10° |
| CPMH090308F-PAP1 | 9.525 | 3.18 | 0.8 | 4.5 | 1 | 80° | 7° | 10° |
»55° Insert
 |
||||||||
| unit:mm | ||||||||
| Order Code | D1 | S1 | Re | D2 | Z | α1 | α2 | α3 |
| DNMM150402F-NAP1 | 12.7 | 4.76 | 0.2 | 5.16 | 1 | 55° | 0° | 10° |
| DNMM150404F-NAP1 | 12.7 | 4.76 | 0.4 | 5.16 | 1 | 55° | 0° | 10° |
| DNMM150408F-NAP1 | 12.7 | 4.76 | 0.8 | 5.16 | 1 | 55° | 0° | 10° |
| DNMM150412F-NAP1 | 12.7 | 4.76 | 1.2 | 5.16 | 1 | 55° | 0° | 10° |
| DCMT070201F-PAP1 | 6.35 | 2.38 | 0.1 | 2.8 | 1 | 55° | 7° | 10° |
| DCMT070202F-PAP1 | 6.35 | 2.38 | 0.2 | 2.8 | 1 | 55° | 7° | 10° |
| DCMT070204F-PAP1 | 6.35 | 2.38 | 0.4 | 2.8 | 1 | 55° | 7° | 10° |
| DCMT11T301F-PAP1 | 9.525 | 3.97 | 0.1 | 4.4 | 1 | 55° | 7° | 10° |
| DCMT11T302F-PAP1 | 9.525 | 3.97 | 0.2 | 4.4 | 1 | 55° | 7° | 10° |
| DCMT11T304F-PAP1 | 9.525 | 3.97 | 0.4 | 4.4 | 1 | 55° | 7° | 10° |
| DCMT11T308F-PAP1 | 9.525 | 3.97 | 0.8 | 4.4 | 1 | 55° | 7° | 10° |
»60° Insert
 |
||||||||
| unit:mm | ||||||||
| Order Code | D1 | S1 | Re | D2 | Z | α1 | α2 | α3 |
| TNMM160402F-NAP1 | 9.525 | 4.76 | 0.2 | 3.81 | 1 | 60° | 0° | 10° |
| TNMM160404F-NAP1 | 9.525 | 4.76 | 0.4 | 3.81 | 1 | 60° | 0° | 10° |
| TNMM160408F-NAP1 | 9.525 | 4.76 | 0.8 | 3.81 | 1 | 60° | 0° | 10° |
| TNMM160412F-NAP1 | 9.525 | 4.76 | 1.2 | 3.81 | 1 | 60° | 0° | 10° |
| TCGW110302F-PAP1 | 6.35 | 3.18 | 0.2 | 2.8 | 1 | 60° | 7° | 0° |
| TCGW110304F-PAP1 | 6.35 | 3.18 | 0.4 | 2.8 | 1 | 60° | 7° | 0° |
| TCGW110308F-PAP1 | 6.35 | 3.18 | 0.8 | 2.8 | 1 | 60° | 7° | 0° |
| TCMT110302F-PAP1 | 6.35 | 3.18 | 0.2 | 2.8 | 1 | 60° | 7° | 10° |
| TCMT110304F-PAP1 | 6.35 | 3.18 | 0.4 | 2.8 | 1 | 60° | 7° | 10° |
| TCMT110308F-PAP1 | 6.35 | 3.18 | 0.8 | 2.8 | 1 | 60° | 7° | 10° |
| TPGB110302F-PAP1 | 6.35 | 3.18 | 0.2 | 3.3 | 1 | 60° | 11° | 0° |
| TPGB110304F-PAP1 | 6.35 | 3.18 | 0.4 | 3.3 | 1 | 60° | 11° | 0° |
| TPGB110308F-PAP1 | 6.35 | 3.18 | 0.8 | 3.3 | 1 | 60° | 11° | 0° |
| TPGB160302F-PAP1 | 9.525 | 3.18 | 0.2 | 4.5 | 1 | 60° | 11° | 0° |
| TPGB160304F-PAP1 | 9.525 | 3.18 | 0.4 | 4.5 | 1 | 60° | 11° | 0° |
| TPGB160308F-PAP1 | 9.525 | 3.18 | 0.8 | 4.5 | 1 | 60° | 11° | 0° |
| TPMH110302F-PAP1 | 6.35 | 3.18 | 0.2 | 3.3 | 1 | 60° | 11° | 10° |
| TPMH110304F-PAP1 | 6.35 | 3.18 | 0.4 | 3.3 | 1 | 60° | 11° | 10° |
| TPMH110308F-PAP1 | 6.35 | 3.18 | 0.8 | 3.3 | 1 | 60° | 11° | 10° |
| TPMH160301F-PAP1 | 9.525 | 3.18 | 0.1 | 4.5 | 1 | 60° | 11° | 10° |
| TPMH160302F-PAP1 | 9.525 | 3.18 | 0.2 | 4.5 | 1 | 60° | 11° | 10° |
| TPMH160304F-PAP1 | 9.525 | 3.18 | 0.4 | 4.5 | 1 | 60° | 11° | 10° |
| TPMH160308F-PAP1 | 9.525 | 3.18 | 0.8 | 4.5 | 1 | 60° | 11° | 10° |
»35° Insert
 |
||||||||
| unit:mm | ||||||||
| Order Code | D1 | S1 | Re | D2 | Z | α1 | α2 | α3 |
| VNMM160402F-NAP1 | 9.525 | 4.76 | 0.2 | 5.3 | 1 | 35° | 0° | 10° |
| VNMM160404F-NAP1 | 9.525 | 4.76 | 0.4 | 5.3 | 1 | 35° | 0° | 10° |
| VNMM160408F-NAP1 | 9.525 | 4.76 | 0.8 | 5.3 | 1 | 35° | 0° | 10° |
| VNMM160412F-NAP1 | 9.525 | 4.76 | 1.2 | 5.3 | 1 | 35° | 0° | 10° |
| VBMT110301F-PAP1 | 6.35 | 3.18 | 0.1 | 2.8 | 1 | 35° | 5° | 10° |
| VBMT110302F-PAP1 | 6.35 | 3.18 | 0.2 | 2.8 | 1 | 35° | 5° | 10° |
| VBMT110304F-PAP1 | 6.35 | 3.18 | 0.4 | 2.8 | 1 | 35° | 5° | 10° |
| VBMT110308F-PAP1 | 6.35 | 3.18 | 0.8 | 2.8 | 1 | 35° | 5° | 10° |
| VBMT160401F-PAP1 | 9.525 | 4.76 | 0.1 | 4.4 | 1 | 35° | 5° | 10° |
| VBMT160402F-PAP1 | 9.525 | 4.76 | 0.2 | 4.4 | 1 | 35° | 5° | 10° |
| VBMT160404F-PAP1 | 9.525 | 4.76 | 0.4 | 4.4 | 1 | 35° | 5° | 10° |
| VBMT160408F-PAP1 | 9.525 | 4.76 | 0.8 | 4.4 | 1 | 35° | 5° | 10° |
Diamond Tools
- PCD full R Ball Nose Cutter
- PCD Router Bits
- CBN Insert
- PCD Insert
- Single Crystal Diamond cutter For Panel
- PCD cutter For Panel
- Diamond cutter in grooving floors
- PCD Table Saw blade
- PCD Panel Sizing Saw Blade
- PCD Scoring Saw Blade
- PCD PCB Sizing Saw Blade
- PCD PCB V-Cut Saw Blade
- PCD PCB Trimming Saw Blade
- PCD Flooring Sizing Saw Blade
- PCD Cement Fiber Saw Blade
- PCD Plexiglass Saw Blade
- CBN/PcBN Tool
- PCD Tool
News
- Cutting fiber-reinforced composite material - Part I
- Principles of Difficult Cutting Material
- Rougher cutters and wave groove milling cutters
- Slitter Knives
- Cutting test for metal ceramic end mills
- Applied tool for automotive industry
- Characteristics of Tungsten Carbide Cutter
- Discontinuous or Segmental Chips
- General cutting tool material
- Production process of cutting tools
- Cutter wear and life
- The super-hard thin film coating material
- Anticlockwise milling and clockwise milling
- Cutting Reference Data for End Mills of Various Materials
- The cutter materials and their contrast
- The cutting tool for hardening material above HRC50
- How to choose woodworking cutters?--part2
- How to choose woodworking cutters?--part1
- Cutter selection Part-2
- Cutter selection Part-1
- What is cutting tool?
- Characteristics of precision miniature cutting tools
- Plain Milling Cutter,End Mill,Side Milling Cutter,Face Milling Cutter
- What’s the difference among tungsten carbide, tungsten steel cutter, and super hard alloy cutter?
- How to calculate the clamping length of the CNC lathe clamp for cutting tools?
- Selections and types of End Mills
- Definition and types of hard metal and difficult material
- How do end mills choose and judge working conditions?
- PCD circular saw blades
- 3 Jaw Adjustable Oil Filter Wrench
- Plastic Power Inductor Machine
- ZrO2 Introduction
- Common mode Choke Inductor machine
- Cutting tool-90° Step Drill
- Cutting tool-Circular saw with metal ceramic blade
- 3000°C Graphite crucible
- Cutting tool-Diamond Product
- SiC Granulation molding machine
- Cu75Ga25, Cu40In60 Target Material
- High-Entropy Alloys
- 8 flute T type Single-Angle Chamfering Cutter
- CNC 5-axis machining technology-Shoe Mold
- Grinding up to nano powders
- Cutting tool-Sharp Top Single Flute Drilling Cutter
- Cutting tool-Precise Engraving Milling Cutter
- Cutting tool-PCD Inserts
- Inductor Powder Compacting Press
- Cutting tool-Electroplated Diamond tools
- Cutting tool-Acrylic Cutting Tools
- Compound Sharpener
- BW carbide cutter cut carbide material
- Cutting tool-Staple Cutter
- Cutting tool-Diamond cutter in grooving floors
Copyright (c) 2003 碧威股份有限公司 Bewise Inc. All Rights Reserved
TEL：(04)2471-0048 / FAX：(04)2471-4839
Head Office：No. 695, Huiwen Road, Nantun District, Taichung City 408, Taiwan (R.O.C.)
E-Mail：[email protected]