cutting tool
KN
Serrated Helico-sheeter Knives
裁切專用刀具-齒型螺旋裁紙飛刀
- Product Information：Serrated Helico - Sheeter Knives working together. Even at high speed operation, high shear strength and dimensionally accurate bevels enable excellent cut and the burr-free razor sharp edge. Not only the balance of toughness and hardness, but dedicated performance over a long time and close tolerances suitable for all kinds of machine types. Clean and sharp bevel reduces the machine load and enhances long lasting life.
Professional paper cutting knives made by HSS containing tungsten are with some benefits as below:
1. Cutting under high temperature with low-wearness.
2. Great improvement on hardness and wear resistance after heat treatment.
3. It may fit machine makers’ design of special purpose.
- Order Code：BW-SHSK-01
- Order Code：BW-SHSK-02
- Order Code：BW-SHSK-03
- Order Code：BW-SHSK-04
- Order Code：BW-SHSK-06
Corrugated Industry Knives
News
- Cutting fiber-reinforced composite material - Part I
- Principles of Difficult Cutting Material
- Rougher cutters and wave groove milling cutters
- Slitter Knives
- Cutting test for metal ceramic end mills
- Applied tool for automotive industry
- Characteristics of Tungsten Carbide Cutter
- Discontinuous or Segmental Chips
- General cutting tool material
- Production process of cutting tools
- Cutter wear and life
- The super-hard thin film coating material
- Anticlockwise milling and clockwise milling
- Cutting Reference Data for End Mills of Various Materials
- The cutter materials and their contrast
- The cutting tool for hardening material above HRC50
- How to choose woodworking cutters?--part2
- How to choose woodworking cutters?--part1
- Cutter selection Part-2
- Cutter selection Part-1
- What is cutting tool?
- Characteristics of precision miniature cutting tools
- Plain Milling Cutter,End Mill,Side Milling Cutter,Face Milling Cutter
- What’s the difference among tungsten carbide, tungsten steel cutter, and super hard alloy cutter?
- How to calculate the clamping length of the CNC lathe clamp for cutting tools?
- Selections and types of End Mills
- Definition and types of hard metal and difficult material
- How do end mills choose and judge working conditions?
- PCD circular saw blades
- 3 Jaw Adjustable Oil Filter Wrench
- Plastic Power Inductor Machine
- ZrO2 Introduction
- Common mode Choke Inductor machine
- Cutting tool-90° Step Drill
- Cutting tool-Circular saw with metal ceramic blade
- 3000°C Graphite crucible
- Cutting tool-Diamond Product
- SiC Granulation molding machine
- Cu75Ga25, Cu40In60 Target Material
- High-Entropy Alloys
- 8 flute T type Single-Angle Chamfering Cutter
- CNC 5-axis machining technology-Shoe Mold
- Grinding up to nano powders
- Cutting tool-Sharp Top Single Flute Drilling Cutter
- Cutting tool-Precise Engraving Milling Cutter
- Cutting tool-PCD Inserts
- Inductor Powder Compacting Press
- Cutting tool-Electroplated Diamond tools
- Cutting tool-Acrylic Cutting Tools
- Compound Sharpener
- BW carbide cutter cut carbide material
- Cutting tool-Staple Cutter
- Cutting tool-Diamond cutter in grooving floors
Copyright (c) 2003 碧威股份有限公司 Bewise Inc. All Rights Reserved
TEL：(04)2471-0048 / FAX：(04)2471-4839
Head Office：No.200, Dadun 2nd St., Nantun Dist., Taichung City 408029, Taiwan
E-Mail：bw@tool-tool.com