cutting tool
Aerospace Carbide Cutters
- Norm：under NAS 986 standard
- Application：working on aerospace industry
- Material：SMG
- Type：There are four types of BW aerospace carbide cutters – Two Flute Ball End Mills, Two Flue Square End Mills, Three Flute Square End Mills, and Four Flute Square End Mills, with three angles, 30°, 35° and 37°, and flat shank or shank with keyway.
Carbide Two Flute Ball End Mills
-
Two Flute Ball End Mills
-30°-
-
Two Flute Ball End Mills
-30°(With No Key Slot)-
-
Two Flute Ball End Mills
-35°- -
Two Flute Ball End Mills
-35°(With No Key Slot)- -
Two Flute Ball End Mills
-37°- -
Two Flute Ball End Mills
-37°(With No Key Slot)-
Carbide Three Flute Square End Mills
-
Three Flute Square End Mills
-30°-
-
Three Flute Square End Mills
-30°(With No Key Slot)-
-
Three Flute Square End Mills
-35°- -
Three Flute Square End Mills
-35°(With No Key Slot)- -
Three Flute Square End Mills
-45°- -
Three Flute Square End Mills
-45°(With No Key Slot)-
Carbide Two Flue Square End Mills
-
Two Flue Square End Mills
-30°-
-
Two Flue Square End Mills
-30°(With No Key Slot)-
-
Two Flue Square End Mills
-37°- -
Two Flue Square End Mills
-37°(With No Key Slot)-
Carbide Four Flute Square End Mills
-
Four Flute Square End Mills
-30°-
-
Four Flute Square End Mills
-30°(With No Key Slot)-
-
Four Flute Square End Mills
-35°- -
Four Flute Square End Mills
-35°(With No Key Slot)- -
Four Flute Square End Mills
-37°- -
Four Flute Square End Mills
-37°(With No Key Slot)- -
Four Flute Square End Mills
-45°- -
Four Flute Square End Mills
-45°(With No Key Slot)- -
Four Flute Square End Mills
-55°- -
Four Flute Square End Mills
-55°(With No Key Slot)-
Aviation Tool
News
- Cutting fiber-reinforced composite material - Part I
- Principles of Difficult Cutting Material
- Rougher cutters and wave groove milling cutters
- Slitter Knives
- Cutting test for metal ceramic end mills
- Applied tool for automotive industry
- Characteristics of Tungsten Carbide Cutter
- Discontinuous or Segmental Chips
- General cutting tool material
- Production process of cutting tools
- Cutter wear and life
- The super-hard thin film coating material
- Anticlockwise milling and clockwise milling
- Cutting Reference Data for End Mills of Various Materials
- The cutter materials and their contrast
- The cutting tool for hardening material above HRC50
- How to choose woodworking cutters?--part2
- How to choose woodworking cutters?--part1
- Cutter selection Part-2
- Cutter selection Part-1
- What is cutting tool?
- Characteristics of precision miniature cutting tools
- Plain Milling Cutter,End Mill,Side Milling Cutter,Face Milling Cutter
- What’s the difference among tungsten carbide, tungsten steel cutter, and super hard alloy cutter?
- How to calculate the clamping length of the CNC lathe clamp for cutting tools?
- Selections and types of End Mills
- Definition and types of hard metal and difficult material
- How do end mills choose and judge working conditions?
- PCD circular saw blades
- 3 Jaw Adjustable Oil Filter Wrench
- Plastic Power Inductor Machine
- ZrO2 Introduction
- Common mode Choke Inductor machine
- Cutting tool-90° Step Drill
- Cutting tool-Circular saw with metal ceramic blade
- 3000°C Graphite crucible
- Cutting tool-Diamond Product
- SiC Granulation molding machine
- Cu75Ga25, Cu40In60 Target Material
- High-Entropy Alloys
- 8 flute T type Single-Angle Chamfering Cutter
- CNC 5-axis machining technology-Shoe Mold
- Grinding up to nano powders
- Cutting tool-Sharp Top Single Flute Drilling Cutter
- Cutting tool-Precise Engraving Milling Cutter
- Cutting tool-PCD Inserts
- Inductor Powder Compacting Press
- Cutting tool-Electroplated Diamond tools
- Cutting tool-Acrylic Cutting Tools
- Compound Sharpener
- BW carbide cutter cut carbide material
- Cutting tool-Staple Cutter
- Cutting tool-Diamond cutter in grooving floors
Copyright (c) 2003 碧威股份有限公司 Bewise Inc. All Rights Reserved
TEL：(04)2471-0048 / FAX：(04)2471-4839
Head Office：No.200, Dadun 2nd St., Nantun Dist., Taichung City 408029, Taiwan
E-Mail：bw@tool-tool.com